1-819-342-5291 / 1-819-919-0587

de 9:00 to 17:00 (lun.-ven.)
Carburetor Stage6 PHBG 21mm - Carburateur Stage6 PHBG 21mm - S6-31PHBG-21
Carburetor Stage6 PHBG 21mm - Carburateur Stage6 PHBG 21mm - S6-31PHBG-21
Carburetor Stage6 PHBG 21mm - Carburateur Stage6 PHBG 21mm - S6-31PHBG-21
Carburetor Stage6 PHBG 21mm - Carburateur Stage6 PHBG 21mm - S6-31PHBG-21
Carburetor Stage6 PHBG 21mm - Carburateur Stage6 PHBG 21mm - S6-31PHBG-21
  • SKU: S6-31PHBG-21
  • Disponibilité: en stock Beaucoup en stock En rupture de stock You can purchase this product but it's out of stock

Carburetor Stage6 PHBG 21mm

$179.99
Shipping calculated at checkout.
DESCRIPTION

CARBU 21 STAGE6 PHBG

Carburateur Stage6 de chez DellOrto pour les Scooters 50cc, les Motos 50 et les Mobylettes.

En cas d'amélioration des performances, il est conseillé de remplacer le carburateur d'origine par un plus grand, afin de pouvoir soutenir de manière optimale le nouveau réglage et d'obtenir une meilleure accélération et une vitesse finale plus élevée.

CARBURATEUR PHBG

Il s'agit d'un carburateur Dellorto PHBG de 21 mm proposé par Stage6. Ce carburateur universel à starter manuel est compatible avec de nombreux deux-roues, notamment les scooters, les motos 50cc, les mobylettes, les Vespa vintage, et autres véhicules équipés d'un moteur 2 temps.

Le starter est ici de type manuel, vous aurez donc le choix de monter soit un starter manuel à câble ou le remplacer par un starter manuel à tirette.

RÉGLAGE DU CARBU 21 STAGE6

Le gicleur principal fourni est de taille 92, le gicleur secondaire de taille 50. En règle il faudra une boite de gicleurs  (D. 5mm), afin de pouvoir réaliser correctement les réglages de votre deux-roues.

Remarque : pour vérifier si le carburateur est bien réglé, il faut regarder la bougie d'allumage afin d'éviter d'endommager le moteur. Pour cela, consultez notre tutoriel.

CARACTÉRISTIQUES TECHNIQUES DU CARBURATEUR 21 PHBG STAGE6 :

  • Carburateur 21 mm PHBG DS de chez Dell'orto
  • Montage souple
  • Gicleur principal : 92 (gicleur avec pas de vis de 5mm)
  • Gicleur de ralenti : 50
  • Gicleur de starter : 60
  • Aiguille W 07
  • Puit d'aiguille AU 262
  • Diamètre du carburateur : 21 mm
  • Diamètre admission (côté pipe) : 25 mm
  • Diamètre admission (côté filtre) : 38 mm
  • Starter manuel
  • Avec arrivée d'huile
  • Sans dépression
  • Sans réchauffeur d'essence
  • Angle couvercle de boisseau : droit
  • Référence Dell'orto : 02632

CARBU 21 STAGE6 PHBG

CARBU 21 STAGE6 PHBG Stage6 carburetor from DellOrto for 50cc Scooters, 50 Motorcycles and Mopeds.

In case of performance improvement, it is advisable to replace the original carburetor with a larger one, in order to be able to optimally support the new tuning and achieve better acceleration and a higher final speed.

PHBG CARBURETOR

This is a 21mm Dellorto PHBG carburetor offered by Stage6. This universal carburetor with manual choke is compatible with many two-wheelers, including scooters, 50cc motorcycles, mopeds, vintage Vespas, and other vehicles equipped with a 2-stroke engine.

The choke here is of the manual type, so you will have the choice of fitting either a manual cable choke or replacing it with a manual pull choke.

FUEL ADJUSTMENT 21 STAGE6

The main nozzle supplied is size 92, the secondary nozzle is size 50. As a rule you will need a box of nozzles (D. 5mm), in order to be able to correctly make the adjustments to your two-wheeler.

Note: To check if the carburetor is properly adjusted, you must look at the spark plug to avoid damage to the engine. To do this, consult our tutorial.

TECHNICAL FEATURES OF THE 21 PHBG STAGE6 CARBURETOR:

  • 21 mm PHBG DS carburettor from Dell'orto
  • Flexible assembly
  • Main jet: 92 (jet with 5mm screw pitch)
  • Idle jet: 50
  • Choke jet: 60
  • Needle W 07
  • Needle well AU 262
  • Carburetor diameter: 21 mm
  • Intake diameter (pipe side): 25 mm
  • Intake diameter (filter side): 38 mm
  • Manual choke
  • With oil inlet
  • Without vacuum
  • Without fuel heater
  • Plug cover angle: right
  • Dell'orto reference: 02632
.product__image.lazyload { opacity: 1 !important; }